This week I've implemented a SIP-trunk at a customer site. This trunk is connected to a Cisco UC540. I could use almost all settings which I used in my lab setup. Before configuring the trunk I wasn't sure if the line setup would work with the CUE (VM-module) embedded in the UC540.
The customer has a simple IP-VPN connection with Routit, this means Routit supports a single IP-sgement with a maximum of 255 hosts and no routing of other customer IP-segments. I wasn't to sure if this was enough or if I had to use NAT because the embeded CUE lives on a different IP-segment. This UC500 was manually configured instead of with CCA. This meant some commands which CCA injects were missing. The following commands made the CUE work with the SIP-trunk without NAT:
Showing posts with label SIP Trunk UC540 Cisco Routit CUE Broadsoft Broadworks. Show all posts
Showing posts with label SIP Trunk UC540 Cisco Routit CUE Broadsoft Broadworks. Show all posts
Saturday, 10 May 2014
Subscribe to:
Posts (Atom)